Pressure Regulator
Water Technology
Manufacturer:
Netafim™ — final model and technical specifications to be confirmed from the official supplier data sheet.
Coming soon
A pressure regulator is used in drip irrigation systems to control and stabilize water pressure before it reaches drip tape, drip pipes, and emitters. It helps prevent bursting, leakage, and uneven water discharge, making the irrigation system safer and more uniform.
View Product
Punch Tool — Precise Hole-Making Tool for Drip Irrigation Fittings
Water Technology
Manufacturer:
Produced by drip irrigation equipment and installation-tool manufacturers. Some models are produced by well-known irrigation brands such as Netafim, while other versions are manufactured by different drip irrigation suppliers. The exact producer depends on the selected model, hole size, pipe type, and fitting compatibility.
Coming soon
A punch tool is used to make clean, accurate holes in PE or HDPE drip irrigation pipes for installing take-off connectors, start connectors, rubber grommets, button drippers, and micro-tube connectors. It helps prevent leakage, improves fitting installation, saves time, and gives a professional drip irrigation connection.
View Product
riser
Water Technology
Available
View Product
Rotary Sprinkler for Lawns, Gardens, Parks, and Medium-Size Irrigation Areas
Water Technology
Manufacturer:
Produced by professional irrigation sprinkler and landscape irrigation equipment manufacturers. Common producer examples include Hunter, Rain Bird, Toro, and other specialized irrigation equipment suppliers. Final brand, model, nozzle type, radius, pressure rating, and technical specifications must be confirmed from the official supplier data sheet.
Coming soon
Rotary sprinkler designed to distribute water through rotating streams for uniform irrigation coverage. Suitable for lawns, gardens, parks, nurseries, landscaped areas, and medium-size irrigation zones.
View Product
Rubber Seal
Water Technology
Manufacturer:
Netafim
Coming soon
A grommet or rubber seal is a flexible sealing component used to create a tight, leak-proof connection where a fitting or pipe passes through a pipe wall, tank, barrel, or panel. It protects the opening, reduces friction, and helps ensure secure installation in drip irrigation and water supply systems.
View Product
Sand / Media Filter — Clean Water Protection for Drip Irrigation
Water Technology
Manufacturer:
Produced by irrigation filtration, pump-system, and water-treatment equipment manufacturers. Common producers include irrigation filter manufacturers that produce plastic, fiberglass, steel, or coated-metal media filters for agricultural irrigation. The exact producer depends on filter size, tank material, flow rate, pressure rating, valve type, and filtration requirement.
Available
A sand / media filter removes sand, silt, algae, organic matter, and suspended particles from irrigation water. It protects drip emitters, valves, pressure regulators, and fertigation equipment from clogging and damage. During normal filtration, dirty water passes through the media bed and clean water exits to the irrigation system. During backwash, water flows upward through the media to remove trapped dirt through the waste outlet.
View Product
Soil Moisture Sensor for Drip Irrigation System
Water Technology
Manufacturer:
Produced by irrigation automation, smart-farming, sensor, and water-management equipment manufacturers.
Coming soon
A soil moisture sensor measures the water condition in the crop root zone and helps decide when irrigation is needed. It supports smart drip irrigation, prevents over-watering and under-watering, saves water, improves crop health, and can be connected to controllers, timers, solenoid valves, or smart irrigation systems.
View Product
Solenoid Valve — Automatic Zone Control for Drip Irrigation
Water Technology
Manufacturer:
Produced by irrigation automation and water-control equipment manufacturers
Coming soon
A solenoid valve is an electrically controlled valve used to automatically open and close water flow in a drip irrigation system. It receives a signal from an irrigation controller or timer and allows water to flow to a selected irrigation zone. When the signal stops, the valve closes and stops the water flow.
View Product
Take-Off Connector — Mainline Outlet for Drip Laterals and Micro Tubes
Water Technology
Manufacturer:
Produced by drip irrigation fitting and water-technology manufacturers. Common producers include irrigation companies such as Netafim and other drip irrigation suppliers. The exact producer depends on connector size, outlet type, pipe compatibility, pressure rating, and manufacturer specification.
Available
A take-off connector is used to take water from a main irrigation pipe and deliver it to a smaller drip lateral, micro tube, extension tube, or plant delivery line. It is installed into a clean punched hole on the main pipe and creates a secure, leak-resistant outlet for drip irrigation branches.
View Product
